Cat 302.7 CR Mini Excavator Hire — Muswellbrook & the Upper Hunter

A 2025 Caterpillar 302.7 CR, bought new from WesTrac and owned outright. Air-conditioned cab, Doherty hydraulic tilt hitch and three buckets, delivered to your site on our own truck and trailer.

Hire it and drive it yourself (dry hire) from $495 a day, or have us do the job with an operator (wet hire) from $130 an hour. Both plus GST.

Cat 302.7 CR mini excavator loaded on a dual-axle plant trailer with ramps

Why this machine

It fits where the big ones don’t

At 1.57 metres wide it goes through gateways and down the side of a house that a 5-tonne machine can’t get near. It’s a compact radius model, so the tail barely swings past the tracks — you can work hard against a fence line or a wall without repositioning all day.

The tilt hitch is included

The Doherty hydraulic tilt hitch angles the bucket from the seat. Batters, table drains, footings on a cross-fall — the jobs that otherwise mean stopping and re-setting the machine every few minutes. Many hire yards charge extra for a tilt hitch, or don’t offer one on a 3-tonne machine at all.

Three buckets, no extra charge

300 mm and 450 mm trenching buckets and a 1000 mm mud and batter bucket come with every hire.

A proper cab

Heated and air-conditioned with a suspension seat. In a Hunter summer or on a cold winter morning, that’s the difference between a full day’s work and a short one.

Specifications

ModelCaterpillar 302.7 CR (Compact Radius)
Year2025 — Next Generation series
Operating weightApprox. 3.1 tonnes as configured
EngineCat C1.1, 17.6 kW (23.6 hp) net
Max dig depth2,710 mm
Max reach at ground level4,710 mm
Max dump clearance3,070 mm
Transport width1,570 mm
Transport height2,480 mm
Tracks300 mm rubber
CabEnclosed, heated and air-conditioned
CertificationROPS, TOPS and Top Guard Level I
HitchDoherty hydraulic tilt hitch

Dimensions are Caterpillar’s published figures for the 302.7 CR with the long stick, as fitted to this machine. If your access is tight, send a photo and we’ll tell you honestly whether it fits.

Attachments

Auger package — $130/day

Cat A23 auger drive with 305 mm and 457 mm bits. Fence posts, deck footings, pier holes and tree planting.

Ripper tyne — $90/day

Doherty heavy-duty ripper for ground a bucket won’t touch: compacted clay, shale, tree roots and old pavement.

Hydraulic grab — $160/day

Limitless heavy-duty 5-finger grab for logs, rock, rubble, pipe and site clean-up. Shackles are tie-down points only — not for lifting.

Attachments are charged per day, never more than 5 days in any week. Plus GST.

Dry hire rates

Hire periodPrice + GST
1 day (24 hours)$495
Weekend (Fri 2pm – Mon 8am)$795
3 days$1,150
1 week (7 days)$1,850
2 weeks$3,400
4 weeks$5,600

Includes 8 engine hours a day, then $45/hr. Delivery and pickup included in Muswellbrook, Aberdeen and Denman — see delivery zones. No bond required. With an operator, see wet hire rates.

Included with every hire

  • Doherty hydraulic tilt hitch
  • 300 mm, 450 mm and 1000 mm buckets
  • Delivery and pickup in Muswellbrook, Aberdeen and Denman
  • On-site handover and machine run-through (dry hire)
  • Signed hire agreement and photo condition report
  • Machine delivered full of fuel
  • Direct line to the owner for the whole hire — you get Justin, not a call centre

Price your job in a minute. The estimator on our home page gives an instant figure for dry hire or wet hire, delivery included. Or ring Justin direct.

Get an instant priceCall 0438 245 206

All prices exclude GST unless shown otherwise. Sydney Street Stays Pty Ltd trading as Sydney Street Hire, ABN 97 684 156 689. Muswellbrook NSW 2333. Open 7 days, 7am to 5pm.